About Us
/ What We Do
Laser Cleaning, Out of Albert County
Collins Laser Restoration runs a 300W pulsed fiber laser out of a shop in Curryville, twenty minutes from Moncton. The beam lifts rust, paint, grease and soot off a surface and stops at the base material underneath. No grit, no chemicals, no pressure, so the part keeps its shape, its thickness and its original tooling marks.
Bring it to the shop, or we bring the machine to you.
Call or text anytime
Watt fiber laser
/ What We Take Off
Rust, Paint, Grease and Soot. Gone.
If it's sitting on top of the material, the laser lifts it. Pick the surface below and we'll tell you straight whether laser is the right tool for the job, or whether something else would serve you better.
Rust and Mill Scale
Steel and cast iron taken down to clean, weldable metal without thinning the panel or rounding an edge.
Paint and Powder Coat
Layer by layer if you want it. Stop at the primer, or take it all the way to bare metal.
Grease, Oil and Carbon
Engine parts, molds, tooling and platens cleaned without a solvent bath or a wire wheel.
Weld Oxide and Prep
Stainless cleaned before and after welding, with no acid and no pickling paste to handle.
Soot and Fire Damage
Char pulled off brick, stone and structural timber while the surface texture stays put.
Masonry and Graffiti
Off stone and brick without the ghost outline a pressure washer leaves behind.
/ Our Benefits
Same Result, None Of The Cleanup
If blasting or hand-stripping is the better call for your job, we will tell you that instead.
Let’s Talk With Us
/ What It Costs
Real Numbers, Before You Call
Starting rates for light contamination on a straightforward piece. Heavy build-up, awkward access and on-site work are quoted per job, which is why a photo gets you a real number and a description gets you a guess.
All rates plus 15% HST. $250 minimum charge. GST/HST registered.
Non-Reflective Metals
Steel, cast iron and stainless
Rust, mill scale and paint
Grease, oil and weld oxide
Shop rate or on-site
$2.50
/sq ft
Reflective Metals
Aluminum, copper and brass
More passes, more care
Same layer-by-layer control
$350 minimum charge
$4.50
/sq ft